Installation Owner manual

ManualsBrandsPeerless-AV ManualsHardwareCMJ453

1 of 5

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

ISSUED: 5-24-99 SHEET NO: 128-9102-6 05-06-10

(113.4 kg) (113.4 kg)

TWO PIECE SUSPENDED CEILING PLATE FOR JUMBO MOUNTS - SPECIFICATIONS

250 lb

Concrete

Wood

Max. Load Capacity

Compatible Jumbo Mount Models

JM2630, JM2640, JM2640D, JM2650, JM2650D, JM2655, JM2660, JM2665, JM2670, JM2675

Model

Number

CMJ453

WARNING

• Weight of TV or screen shall not exceed maximum load capacity.

Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

This Suspended Ceiling Plate is intended for use only to support Jumbo

Mount TV Brackets or other products as speciﬁ ed by Peerless. Com-

bine only as speciﬁ ed (see speciﬁ cations on page 3).

This product is intended for use with UL

Listed products and must be installed by a

qualiﬁ ed professional installer.

Model: CMJ453

Installation & Assembly -

Two Piece Suspended Ceiling Plate

for Jumbo Mounts

Max. Load Capacity : 250 lb (113.4 kg)

USC

Description Qty. Part #

ceiling tray

1 128-2185

filler tray

1 128-2207

10 mm long phillips screw

8 520-9401

20 mm long phillips screw

4 520-9402

hanger bracket

4 1452-278

hanger bracket clamp

4 1452-279

turnbuckle

4 560-9620

20' (6.1 m) tie wire (not shown)

1 1450-522

safety cable (not shown)

1 1450-517

safety cable clamp

2 1450-518

eye bolt

580-0006

concrete anchor 5 580-0005

M 1/4"-20 x 3/8" screws (not shown) 4 520-2015

N 1/4"-20 nuts (not shown) 4 530-9302

O allen wrench (not shown) 1 560-9706

P flush mount tube 1 1446-014S

Q M5 x 10 mm penta pin screw 1 505-9010

R M5 x 1" penta pin drive

1 520-9249

Parts List

Summary of content (5 pages)

PAGE 1
Installation & Assembly - Two Piece Suspended Ceiling Plate for Jumbo Mounts C UL © US Model: CMJ453 This Suspended Ceiling Plate is intended for use only to support Jumbo Mount TV Brackets or other products as speciﬁed by Peerless. Combine only as speciﬁed (see speciﬁcations on page 3). This product is intended for use with UL Listed products and must be installed by a qualiﬁed professional installer. Max. Load Capacity : 250 lb (113.
PAGE 2
IMPORTANT PRE-ASSEMBLY INFORMATION: Ceiling Trays (A), and (A1) are designed to ﬁt within a 24" (610 mm) x 24" (610 mm) section of a conventional suspended ceiling system. Ceiling runners (see DETAIL 1, page 4) should have a "T" cross section and a minimum height of 1.5" (38 mm). In cases where 24" (610 mm) x 48" (1219 mm) ceiling tiles are used, cut one tile in half and add another 24" (610 mm) ceiling runner in order to make a 24" (610 mm) x 24" (610 mm) section.
PAGE 3
Attach four Hanger Brackets (D) to four corners of Ceiling Tray (A) using 10 mm long phillips screws (B). Place Ceiling Tray (A) into 24" (610 mm) x 24" (610 mm) opening in ceiling (in place of a ceiling tile) with retaining collar to center, right, or left. Place Filler Tray (A1) into gap. Attach Ceiling Tray (A) to Filler Tray (A1) using four bolts (M) and nuts (N). Clamp Ceiling Tray (A) to Ceiling Runners using Hanger Bracket Clamps (E) and 20mm long phillips screws (C).
PAGE 4
Cut tie wire (G) into four pieces of equal length. Insert wires through ends of turnbuckles. Twist each wire around itself at least four times. Drill holes for four ceiling anchors (see "Various Anchoring Methods"). Position the holes so that when the tie wires (G) are attached and taut will angle out at 15O. Drill a ﬁfth anchor hole directly above the center of the retaining collar in ceiling tray. Pull tie wires tight and attach to ends of ceiling anchors (or truss).
PAGE 5
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. establishes a warranty period of ﬁve years for products manufactured or supplied by Peerless. This period commences from the date of sale of the product to the original consumer, but will in no case last for more than six years after the date of the product’s manufacture.