Installation Owner manual

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
5 of 25
7.00
6.23
3.00
13.50
2
Slide two 1/4-20 x 1 3/4" bolts through slots on lock down plate as shown below. (supplied in HLG-452-001)
NOTE: 2 1/4" carriage bolts (ACC939) are available for use with thicker mounting surfaces.
47LG50DC
TABLETOP
POINT1 POINT2
RUBBERFEET
1
Use lock-down plate as a template to mark location of holes, point 1 and point 2, exactly 7" apart on table. Drill two
holes using a 1/4'' drill bit.
Installation(HLG452-001)47LG50DC
(PLACEONTOPOFEXISTINGFEET)
47LG50DC
DISPLAYMODELHOLEPATTERN
3
#10 x 3/8 phillips self drilling screws (D)
LOCK-DOWN
PLATE
ENSUREPROPER
ORIENTATION
OFLOCK-DOWN
PLATE