Installation Owner manual
ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
22 of 25
THIS IS FOR CONCEPT ONLY.
ECN DATE:
11.50
12.50
10.50
3.344.34
7.13
1
42PQ30C
#10 x 3/8 phillips self drilling screws (D)
Flip TV stand upside down and attach four additional rubber pads (C) over existing pads. The width is measured
and located 5.75" from center line of display as shown below.
Attach both front lock-down brackets to desktop using two #8 x 3/4 phillips screws and washers as shown in g
1.1. (supplied in FLD-UNV-LG)
NOTE: Use the same number of washers for both front lock-down brackets.
Extra washers are included in case additional height is required as shown in detail 1. Two are recommended
for each screw.
DETAIL1
DESKTOP
g.1.1
Rubber pads (C)
(PLACEONTOPOFEXISTINGFEET)
NOTE: Use this option when optimum security is needed. Brackets may be ipped for more distance from the
edge of the table as shown below.
NOTE: Back lock-down bracket may be placed with ange facing up to allow the display to be positioned further forward
as shown below.
BACK EDGE OF DESKTOP
DETAIL3
DETAIL4