Installation Owner manual
ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
19 of 25
5.60
7.40
8.40
6.40
7.50
4.60
7.17
1.00
13.50
3.54
.838 MAX
13.173
1.00 1.00
1
52LG50DCOption1
M5 x 12 mm screws (A)
Rubber pads (C)
NOTE: Use the same number of washers for both front lock-down brackets.
Extra washers are included in case additional height is required as shown in detail 1. Two are recommended
for each screw.
DETAIL1
DESKTOP
g.1.1
(PLACEONTOPOFEXISTINGFEET)
NOTE: Use this option when optimum security is needed. Brackets may be ipped for more distance from the
edge of the table as shown on page 20 detail 3. Flip TV stand upside down and attach four additional rubber pads
(C) over existing pads or symmetrically. The width is measured and located 7.08" from center line of display as
shown below. Attach both front lock-down brackets to desktop using two #8 x 3/4 phillips screws and washers as
shown in g 1.1. (supplied in FLD-UNV-LG)