Installation Owner manual

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

17of25

NOTE: Back lock-down bracket may be placed with ange facing up to allow the display to be positioned further forward

as shown below.

BACK EDGE OF DESKTOP

5.26

15.90

16.98

14.98

4.26

13.498

3.86

11.38

3.35

MAX

12.80

11.80

1.00

7.25

1.00

NOTE: Use this option when back brackets cannot be ipped when a longer distance from the back of the table is

desired. Flip TV stand upside down and attach four additional rubber pads (C) over existing pads.

# 8 x 1/2 phillips screw

The width is measured and located 7.95" from center line of display as shown below.

Attach both front lock-down brackets to desktop using two #8 x 3/4 phillips screws and washers as shown in g

3.1. (supplied in FLD-UNV-LG)

NOTE: Use the same number of washers for both front lock-down brackets.

Extra washers are included in case additional height is required as shown in detail 2. Two are recommended

for each screw.

g.1.1

47LG50DCOption2

Rubber pads (C)

(PLACEONTOPOFEXISTINGFEET)

DETAIL2

DESKTOP

DETAIL3

DETAIL4