Installation Owner manual

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

16 of 25

5.60

7.40

8.40

6.40

7.50

4.60

7.17

1.00

13.50

3.54

.838

MAX

13.173

1.00 1.00

47LG50DCOption1

#10 x 3/8 phillips self drilling screws (D)

Flip TV stand upside down and attach four additional rubber pads (C) over existing pads. The width is measured

and located 3.7" from center line of display as shown below.

Attach both front lock-down brackets to desktop using two #8 x 3/4 phillips screws and washers as shown in g

1.1. (supplied in FLD-UNV-LG)

NOTE: Use the same number of washers for both front lock-down brackets.

Extra washers are included in case additional height is required as shown in detail 1. Two are recommended

for each screw.

DETAIL1

DESKTOP

g.1.1

Rubber pads (C)

(PLACEONTOPOFEXISTINGFEET)

NOTE: Use this option when optimum security is needed. Brackets may be ipped for more distance from the

edge of the table as shown on page 17 detail 3.