Installation Owner manual

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

11 of 25

THIS IS FOR CONCEPT ONLY.

ECN DATE:

13.90

4.35

7.00

6.72

Use lock-down plate as a template to mark location of holes, point 1 and point 2, exactly 7" apart on table. Drill two

holes using a 1/4'' drill bit.

50PQ30C

POINT1

POINT2

TABLETOP

Slide two 1/4-20 x 1 3/4" bolts through slots on lock down plate as shown below. (supplied in HLG-452-001)

NOTE: 2 1/4" carriage bolts (ACC939) are available for use with thicker mounting surfaces.

InstallationOptionfor(HLG452-001)50PQ30C

RUBBERFEET

(PLACEONTOPOFEXISTINGFEET)

DISPLAYMODELHOLEPATTERN

#10 x 3/8 phillips self drilling screws (D)

50PQ30C

LOCK-DOWN

PLATE

ENSUREPROPER

ORIENTATION

OFLOCK-DOWN

PLATE