Installation Owner's manual

2 of 5 ISSUED: 04-28-03 SHEET #: 095-9161-3 08-16-04

Visit the Peerless Web Site at www.peerlessindustries.com

For customer service call 1-800-729-0307 or 708-865-8870.

Use stud finder to locate center of metal stud. Place and level

metal stud wall plate (A) on wall and mark the centers of the

six circled holes on the wall as shown right.

Drill two 11/16" (17 mm) dia. holes through

center of metal

stud. Screw four zip-it drywall anchors (B) in the four marked

corner holes as shown below.

METAL

STUD

DRYWALL

11/16" dia. hole

(2 plcs.)