Installation User Manual

ManualsBrandsPeerless-AV ManualsHardwareACC560

1 of 4

ISSUED: 02-06-07 SHEET #: 054-9125-2 07-30-07

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.

Note: Read entire instruction sheet before beginning installation and assembly.

Installation and Assembly - Ceiling Plate

Model: ACC 560

Maximum load capacity:

50 lb (22.7 kg)

• Installer must verify that the supporting surface will safely support the combined weight of mount and projector.

WARNING

Description Qty. Part #

ceiling plate 1 580-1042

#14 x 2.5" (6 mm x 65 mm) wood screw 2 5S1-015-C03

M5 x .8 x 10 mm socket pin screw 1 520-1164

4 mm allen wrench 1 560-9646

M5 x .8 x 10 mm phillips screw 1 520-9250

alligator® anchor 2 590-0097

Parts List

Summary of content (4 pages)

PAGE 1
Installation and Assembly - Ceiling Plate Model: ACC 560 Note: Read entire instruction sheet before beginning installation and assembly. Maximum load capacity: 50 lb (22.7 kg) WARNING • Installer must verify that the supporting surface will safely support the combined weight of mount and projector. Parts List A B C D E F Description ceiling plate #14 x 2.5" (6 mm x 65 mm) wood screw M5 x .8 x 10 mm socket pin screw 4 mm allen wrench M5 x .8 x 10 mm phillips screw alligator® anchor Qty.
PAGE 2
Installation To Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings 1 Drill two 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach ceiling plate (A) with two #14 x 2.5" (6 mm x 65 mm) wood screws (B) as shown using 3/8" (10 mm) socket wrench. WARNING • Installer must verify that the supporting surface will safely support the combined weight of mount and projector. • Tighten wood screws so that ceiling plate is firmly attached, but do not overtighten.
PAGE 3
WARNING • When installing Peerless wall mounts on concrete, verify that you have a minimum of 1 5/8" of actual concrete surface in the 1/4" diameter hole to be used for the concrete anchors. Do not drill into mortar joints! Concrete must meet ASTM C-90 specifications. • Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. • Installer must verify that the supporting surface will safely support the combined weight of mount and projector.
PAGE 4
Installation to Extension Column 2 Screw extension column to ceiling plate (A). Align the notch with one of the four holes in the ceiling plate (A) and secure extension column with a M5 x 10 phillips screw (E) or a M5 x 10 mm socket pin screw (C) using security allen wrench (D). See detail 1. A E or C A EXTENSION COLUMN (UL Listed EXT or ADJ Series) Sold Separately EXTENSION COLUMN DETAIL 1 SLOT 4 of 4 Visit the Peerless Web Site at www.peerlessmounts.com © 2007, Peerless Industries, Inc.