Installation User guide

ManualsBrandsPeerless-AV ManualsHardwareACC556

1 of 3

ISSUED: 01-11-93 SHEET #: 128-9007-2 11-16-04

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

For customer service, or to

order accessory kits call

1-800-729-0307 or

708-865-8870

Max. Load Capacity:

300 lb (137 kg)

Fully thread flush mount tube into threaded fitting in

lower ceiling bracket (B).

Note: If you will install an extension column do not

install flush mount tube. Begin with step 2.

Flush Mount

Tube (included

with Jumbo

Mount Bracket)

For Wood Joist Finished Ceiling, Exposed Wood

Joists, or Wood Beam Ceiling. (See for concrete

ceilings). Drill two 5/32" (4 mm) dia. holes to a

minimum depth of 2.5" (64 mm). Attach upper ceiling

bracket (A) with two #14 x 2.5" (6 mm x 65 mm)

wood screws (F).

PARTS LIST

PART # QTY. DESCRIPTION

A 1465-273 1 upper ceiling bracket

B 2JM-11CP01L 1 lower ceiling bracket

C 520-9215 4 3/8-16 x 3/4" carriage bolt

D 540-9407 4 flat washer

E 530-9310 4 3/8-16 nylock nut

F 5S1-015-C04 2 #14 x 2.5" (6mm x 65mm) wood screw

G 520-9250 1 M5 x .8 x 10mm phillips screw (for use

with extension column if applicable)

wall

joist

ceiling

Note: Read entire instruction sheet before beginning

installation and assembly.

Installation and Assembly - Cathedral Ceiling Adapter

Model: ACC 556

CEILING CONSTRUCTION ADDITIONAL HARDWARE REQUIRED

Wood Joist, Wood Beam none

Concrete, Concrete Anchor Kit - order accessory kit ACC 200.

Note: Some units may already include concrete anchors.

Other or unsure? Consult a qualified professional installer or call

Peerless Customer Service.

IMPORTANT! Certain ceilings require additional mounting hardware...

This product is intended for use with UL

Listed products and must be installed by a

qualified professional installer.

• Tighten wood screws so that ceiling bracket is firmly

attached, but do not overtighten. Overtightening can

damage the screws, greatly reducing their holding

power.

• Never tighten in excess of 80 in. • lb (9 N.M.).

WARNING

Summary of content (3 pages)

PAGE 1
Installation and Assembly - Cathedral Ceiling Adapter Note: Read entire instruction sheet before beginning installation and assembly. Model: ACC 556 This product is intended for use with UL Listed products and must be installed by a qualified professional installer. R IMPORTANT! Certain ceilings require additional mounting hardware... CEILING CONSTRUCTION ADDITIONAL HARDWARE REQUIRED Wood Joist, Wood Beam none Concrete, Concrete Anchor Kit - order accessory kit ACC 200.
PAGE 2
WARNING • Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. • Make sure that the ceiling will safely support four times the combined load of the equipment and all attached hardware and components. WARNING ceiling • Make sure that the ceiling will safely support the combined load of the equipment and all attached hardware and components. A • Never exceed the Max. Load Capacity of 300 lb (137 kg). For Concrete Ceilings drill four 5/16" (8 mm) dia.
PAGE 3
Insert two carriage bolts (C) into upper ceiling bracket (A) and two carriage bolts into lower ceiling bracket (B). ceiling A B C ceiling A B Attach lower ceiling bracket (B) to upper ceiling bracket (A) using four flat washers (D) and nylock nuts (E). Tighten all nuts. Note: use a level to make sure lower ceiling bracket (B) is level. E D 3 of 3 Visit the Peerless Web Site at www.peerlessindustries.com © 2004 Peerless Industries, Inc. All rights reserved.