Product Manual

VX
VORTEX
1
5
7
2
3
12
4
10
8
8
6
11
9
9 CAPACITOR
Pump Capacitance
Single-phase
(230 V) (115 V or 127 V)
VXm 8/35-N
VXm 10/35-N
2
0 μF 450 VL 30 μF - 250 VL
10 ELECTRIC MOTOR
VXm: single-phase 230 V - 60 Hz
with thermal overload protector incorporated into the winding
VX: three-phase 460
V - 60 Hz
– Insulation: class F
– Protection: IP X8
11 POWER CABLE
“H07 RN-F” type
(with electrical plug for single-phase versions
only)
Standard length 16 feet
12 FLOAT SWITCH
(only for single-phase versions)
POS. COMPONENT CONSTRUCTION CHARACTERISTICS
1 PUMP BODY Cast iron with an Epoxy Electro Coating treatment, with threaded port in compliance with ISO 228/1
2 BASE Stainless steel AISI 304
3 IMPELLER Stainless steel AISI 304 VORTEX type
4 MOTOR CASING Stainless steel AISI 304
5 MOTOR CASING PLATE Stainless steel AISI 304
6 MOTOR SHAFT Stainless steel EN 10088-3 - 1.4104
7 SHAFT WITH DOUBLE MECHANICAL SEAL SEPARATED BY AN OIL CHAMBER
Seal Shaft Position Materials
Model Diameter Stationary ring Rotational ring Elastomer
MG1-14D SIC Ø 14 mm
Motor side Silicon carbide Graphite NBR
Pump side Silicon carbide Silicon carbide NBR
8 BEARINGS 6203 ZZ / 6203 ZZ