Spec Sheet

ManualsBrandsPedrollo ManualsTools and HardwareJCRm 2C Mono Phase Self-Priming "JET" Pumps with .75 kW, 1 HP, 85 Liters per Minute Flow Rate

JCR 2

122 | GENERAL CATALOGUE 60 Hz

Suitable for use with clean water and with liquids that are not

chemically aggressive towards the materials from which the pump

is made. The self-priming JCR pumps are designed to pump water

even in cases where air is present. As a result of their reliability

and the fact that they are easy to use, they are recommended for

use in domestic applications such as the distribution of water in

combination with small or medium sized pressure tanks, and for

the irrigation of gardens and orchards, etc.

The pump should be installed in an enclosed environment or

sheltered from inclement weather.

PATENTS - TRADE MARKS - MODELS

• European Patent n. 1 510 696

OPTIONS AVAILABLE ON REQUEST

• Pump body with NPT ANSI B 1.20.1 threaded ports

• Other voltages

GUARANTEE

2 years subject to terms and conditions

PERFORMANCE RANGE

• Flow rate up to 70 l/min (4.2 m³/h)

• Head up to 65 m

APPLICATION LIMITS

• Manometric suction lift up to 9 m (HS)

• Liquid temperature between -10 °C and +40 °C

• Ambient temperature up to +40 °C

• Max. working pressure 6 bar

• Continuous service S1

CONSTRUCTION AND SAFETY STANDARDS

EN 60335-1

IEC 60335-1

CEI 61-150

EN 60034-1

IEC 60034-1

CEI 2-3

CERTIFICATIONS

Company with management system certied DNV

ISO 9001: QUALITY

ISO 14001: ENVIRONMENT

INSTALLATION AND USE

Self-priming “JET” pumps

Clean water

Domestic use

Civil use

| 60 Hz |

Summary of content (4 pages)

PAGE 1
JCR2 Self-priming “JET” pumps Clean water Domestic use Civil use PERFORMANCE RANGE •• Flow rate up to 70 l/min (4.2 m³/h) •• Head up to 65 m APPLICATION LIMITS •• Manometric suction lift up to 9 m (HS) •• Liquid temperature between -10 °C and +40 °C •• Ambient temperature up to +40 °C •• Max. working pressure 6 bar •• Continuous service S1 Suitable for use with clean water and with liquids that are not chemically aggressive towards the materials from which the pump is made.
PAGE 2
CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 65 60 Hz 5 10 0 n= 3450 min-1 HS= 0 m 15 5 US g.p.m. 10 15 Imp g.p.m. feet JCR2A 200 60 JCR2B 55 180 50 160 Head H (metres) 4 JCR2C 45 140 40 120 35 30 100 25 80 20 15 60 0 5 10 15 0 20 25 30 35 1 40 45 2 50 55 60 65 3 70 4 l/min m³/h Flow rate Q 4 MODEL POWER (P2) Single-phase Three-phase kW HP JCRm 2C JCR 2C 0.75 1 JCRm 2B JCR 2B 0.90 1.25 JCRm 2A JCR 2A 1.1 1.
PAGE 3
JCR2 POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1 2 BODY BACKPLATE Stainless steel AISI 304 3 NOZZLE ASSEMBLY Noryl FE1520PW 4 IMPELLER Stainless steel AISI 304 5 MOTOR SHAFT Stainless steel EN 10088-3 - 1.
PAGE 4
DIMENSIONS AND WEIGHT n f a h1 h h3 DN1 h2 DN2 s n1 w MODEL PORTS Single-phase Three-phase JCRm 2C JCR 2C JCRm 2B JCR 2B JCRm 2A JCR 2A DN1 DN2 1” 1” DIMENSIONS mm a 111 f 393 h 217 * h1 162 h2 46 h3 208 kg n 208 n1 w 142 s 91 10 1~ 3~ 10.2 10.2 11.1 11.1 11.8 11.5 (*) h=236 mm for single phase versions at 110V or 127 V ABSORPTION MODEL VOLTAGE MODEL VOLTAGE Single-phase 220 V 110 V 127 V Three-phase 220 V 380 V 220 V 440 V JCRm 2C 5.