Spec Sheet

JCR1
1 43 6 95
77
2
8
120 | GENERAL CATALOGUE 60 Hz
POS. COMPONENT CONSTRUCTION CHARACTERISTICS
1 PUMP BODY Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1
2 BODY BACKPLATE Stainless steel AISI 304
3 NOZZLE ASSEMBLY Noryl FE1520PW
4 IMPELLER Stainless steel AISI 304
5 MOTOR SHAFT Stainless steel EN 10088-3 - 1.4104
6 MECHANICAL SEAL
Seal Shaft Materials
Model Diameter
Stationary ring Rotational ring Elastomer
AR-12 Ø 12 mm Ceramic Graphite NBR
7 BEARINGS 6201 ZZ / 6201 ZZ
8 CAPACITOR
Pump Capacitance
Single-phase (220 V) (110 V or 127 V)
JCRm 1C 10 μF - 450 VL 25 μF - 250 VL
JCRm 1B 10 μF - 450 VL 25 μF - 250 VL
JCRm 1A 14 μF - 450 VL 25 μF - 250 VL
9 ELECTRIC MOTOR JCRm: single-phase 220 V - 60 Hz with thermal overload protector incorporated into the winding.
JCR: three-phase 220/380 V - 60 Hz or 220/440 V - 60 Hz.
➠ The three-phase pumps are fitted with high performance motors up to
P=0.48 kW in class IE2 and from P=0.55 kW in class IE3 (IEC 60034-30-1)
– Insulation: class F
– Protection: IP X4
| 60 Hz |