Owner's Manual
MINIMUM INSERTION MARK
SHOULD NOT BE VISIBLE
iii
ii
i
To insert saddle or to adjust saddle height, you need to release the seat clamp by turning an-clockwise. This will require a
spanner which was provided in the box with the bike.
Once the seat clamp is released, the seat post will become loose and you will be able to move the saddle up and down.
Once your saddle is at the desired height, ghten up the seat clamp again by turning clockwise as shown.
i
ii
iii
3A SADDLE INSTALLATION & ADJUSTMENT
SADDLE HEIGHT
Saddle height is very important in order to make your child’s cycling experince more enjoyable and of course safer. The correct saddle
height should not cause their knee to lock out with their foot on the pedal in the downward most posion, however their knee
should only be slightly bent.
When adjusng the saddle, always be aware of the minumum inseron mark and always make sure this is not visible above the
frame, or you risk damaging the bicycle or losing control causing serious injury or worse.
3. TECH
6