Owner's Manual

33
Correct ghtening torque of threaded fasteners is very important to your safety. Always ghten fasteners to the correct torque. In
case of a conict between the instrucons in this manual and informaon provided by a component manufacturer, consult with
a qualied bicycle mechanic or the manufacturer’s customer service representave for claricaon. Bolts that are too ght can
stretch and deform. Bolts that are too loose can move and fague.
Either mistake can lead to a sudden failure of the bolt. Always use a correctly calibrated torque wrench to ghten crical fasteners
on your bike. Carefully follow the torque wrench manufacturer’s instrucons on the correct way to set and use the torque wrench
for accurate results.
Threaded Headset Locknut
Stem Expander Bolt (quill type)
Handlebar Binder Bolt (quill type)
Stem Binder Bolt (threadless)
Compression Cap
Stem Faceplate Bolts
Pedal
Crank Arm
Axle Nut
Seat Post Binder
Seat Rail Binder
Shi Lever
Rear Derailleur Mounng Bolt
Rear Derailleur Cable Pinch Bolt
Rear Derailleur Pulley Wheel Bolt
16-24 Nm (142-212in-lb)
17-22 Nm (150-195in-lb)
17-22 Nm (150-195in-lb)
13.5-16 Nm (120-144in-lb)
2-3 Nm (20-26in-lb)
13.5-19 Nm (120-168in-lb)
34.5-40 Nm (307-354in-lb)
45-50Nm (398-442in-lb)
20-25 Nm (177-221in-lb)
17 Nm (150in-lb)
18-34 Nm (160-300in-lb)
6-8 Nm (53-70in-lb)
8-10 Nm (70-86in-lb)
4-5 Nm (35-45in-lb)
3-4 Nm (27-36in-lb)
Disc Brake Rotor To Hub
Disc Brake Caliper Mount
Brake Caliper Mount to Frame (side/dual)
Brake Caliper Mount to Braze-on Linear Pull/Canlever
Brake Pad (Threaded Stud, Dual Pivot/Sidepull)
Brake Pad (Smooth Stud, )
Brake Cable Pinch Bolt (Linear Pull)
Brake Cable Pinch Bolt (Sidepull/ Dual Pivot)
Brake Caliper Arm Pivot (Dual Pivot)
Sidepull/Dual Pivot Brake Pad Bolt
Canlever Straddle Wire Pinch 5 x 0.8 Thread
Brake Caliper Wire Pinch Linear Pull
Brake Lever (MTB type)
Brake Lever (Drop Bar Type)
Mudguard Bolts 6-9 Nm (53-78in-lb)
Mudguard Bracket Bolts 2.5-4 Nm (25-35in-lb)
Base Clip Bolts
Mount Bracket Bolts
Strut Bolts
4-7 Nm (36-60in-lb)
6-9 Nm (52-84in-lb)
8-9.5 Nm (70-85in-lb)
5-7 Nm (44-60in-lb)
5-7 Nm (44-60in-lb)
8-9 Nm (70-78in-lb)
6-8 Nm (53-69in-lb)
6-8 Nm (53-69in-lb)
8-9.5 Nm (70-85in-lb)
5-7 Nm (44-60in-lb)
4-5 Nm (35-43in-lb)
5.5-8.5 Nm (50-75in-lb)
6-8 Nm (53-69in-lb)
6-8 Nm (53-69in-lb)
6-9 Nm (53-78in-lb)
2.5-4 Nm (25-35in-lb)
2.5-4 Nm (25-35-lb)
2.5-4 Nm (25-35-lb)
2.5-4 Nm (25-35-lb)
5. Torque Specicaons