Owner's Manual

15
3F. BASKET INSTALLATION
If your bike is either a heritage or trekking style bike, it may have come with a basket. There are two main types of basket, tradional and quick
release.
Tradional basket
If you have a tradional wicker or faux wicker basket, rst you will need to t the basket bracket on the wheel axle. This explained in the wheel
secon of this manual. If your wheel is already installed, you may need to loosen the nuts to get the bracket in place. Once you have done this,
follow these steps to install the basket.
Make sure the stem basket braket is facing the front and that the fork
basket bracket is above the wheel in the horizontal posion as shown.
Sit the basket on the fork bracket with the xing plate towards the
stem bracket, making sure the cables don’t get in the way.
Line the base plate on the bracket up with the holes on the basket
bracket, and drop 2 xing screws with washers in the holes as
shown.
Place two washers and screw on the two nuts from underneath
as shown, turning clockwise unl nger ght.
i
ii
STEM BASKET
BRACKET
FORK BASKET
BRACKET
FIXING
SCREWS
TOP VIEW BOTTOM VIEW