Owner's Manual
14
3E. CHAIN TENSION
Single Speed Bikes
There should be approximately 10mm total movement in the middle of the chain underside. Having the chain too loose can lead to it coming
o, too ght can make it dicult to pedal and lead to premature failure of the freewheel, chainwheel or chain.
Chain tension is varied by loosening the rear wheel and moving it in or out slightly (see wheels secon). Normally tension needs to be applied
while the nuts are being ghtened in order to stop the axle slipping forwards
Geared Bikes
No adjustment should be needed, as the derailleur tensions the chain.
10mm