Owner's Manual
11
Installing and adjusng a front wheel with a nued system
If your bike comes with a nued front wheel, the nuts will usually come already on the front wheel.
Make sure the wheel nuts are loosened by turning anclockwise,
exposing as much of the thread as possible.
i
For this step, as long as your saddle and handlebar
are installed, it helps to turn the bike upside down.
You should then insert the wheel into the dropouts as
shown, ensuring that the locking washers are on the
outside of the fork as shown.
You may need to release the brakes to get the wheel
through. If this is the case, go the brakes secon of
this manual where you will nd instrucons on how
to do this.
ii
LOCKING
WASHER
NUTS
AXLE
FORK