Owner's Manual

10
3D WHEEL INSTALLATION & ADJUSTMENT
The wheel axles are inserted into slots, called “dropouts” in the fork and frame. Examples below
Dropouts come in way too many dierent shapes and sizes to be able to illustrate them all here, but these examples should guide
you to indenfying where your dropouts are.
FORK DROPOUT REAR DROPOUT
NUTTED WHEEL SYSTEM
DROPOUTS
NUTS
WHEEL HUB
How does it work?
The wheel hub is clamped in place by the force of the nuts against
the dropouts. The amount of clamping force is controlled by the
ghtness of the nuts. Turning the tnuts clockwise increases clamping
force; turning them counterclockwise reduces clamping force.
Both nuts need ghtening to correct torque, available at the rear of
this manual