Quick Assembly Guide

6
3.- FITTING THE MUDGUARD
A B
Feed the mudguard front first through the rear of the
fork, pacing the sloed plate over the protruding bolt.
Unscrew the nut to the rear of the fork
which holds the brake by turning
anti-clockwise using the spanner
provided, and remove the nut and
washer. Make sure the brakes stay in
place
C
Replace washer then nut and tighten
using spanner provided.
TOOLS NEEDED
SPANNER
REAR TOP OF FORK
REAR OF FORK
FRONT
REAR
IF YOU ARE EXPERIENCING ANY PROBLEMS PLEASE CALL 0161 813 1745 BEFORE RETURNING BIKE TO STORE