Quick Assembly Guide

1.- FITTING THE HANDLEBAR
Front of bike
Rear of bike
TOP VIEW
TOOLS NEEDED
SPANNER
A
Insert the handlebar into the frame. If
necessary loosen the stem bolt at the top of
the handlebars and stem to allow the wedge
nut to move freely. Make sure the minimum
inseron mark is not visible once this is fied.
The handlebar must be inserted beyond this
point.
B
The handlebar must be straight. Align this with the fork by
looking downwards at it. The brakes must be facing the front
of the bike. Use the spanner to ghten the bolt on top of the
handlebar stem. Do not fully ghten unl the end as you may
need to adjust the height.
BIKE FRAME
HANDLEBAR
MINIMUM
INSERTION
MARK
BOLT
Front of bike
Rear of bike
BRAKES
FORK
4
IF YOU ARE EXPERIENCING ANY PROBLEMS PLEASE CALL 0161 813 1745 BEFORE RETURNING BIKE TO STORE