Quick Assembly Guide

5.- FITTING THE PEDALS
SCREW CLOCKWISE
To fit the pedals correctly, you must posion them the correct way around and screw them on in the right direcon:
Sckers indicate the le and right pedal. If these have dropped off, look at the end of the thread where it is imprinted.
The correct pedal needs to be aached to the matching side of the bike i.e. le pedal to le side and right pedal to right side.
IMPORTANT! Pedals need screwing in opposite direcons so they don’t fall off in use.
Le pedal is screwed in an-clockwise / Right pedal is screwed in clockwise. Tighten pedals with spanner provided.
PLEASE MAKE SURE YOU FIT THE CORRECT PEDAL TO THE CORRECT SIDE. FAILURE TO DO SO MAY RESULT
IN CROSS-THREADING, WHICH CAN CAUSE IRREPARABLE DAMAGE NOT COVERED BY WARANTY
i
i
ii
iii
ii iii
THREADS
L R
L
R
RIGHT
SCREW ANTI CLOCKWISE
LEFT
TOOLS NEEDED
SPANNER
10