User Manual

info pecole.vip

www.pecole.vip

1. Shock function test

- Turn on the receiver collar.

- Attach the contactor of the test light tool to the contact points (or conductive silicone prongs).

- Press the shock button, and the test light tool will light up. It will light up according

to the increase of shock degree.

5.5. How to use the test light tool

- 11-

*NOTE:

You can skip this step because this setting has been paired by the factory settings.

1. Please ensure that the receiver collar is turned off.

2. Hold down the switch for 5 seconds until the

green light ﬂ

ashes quickly.

5.6. Pairing

2. As a tool for tightening or loosening the contact points

Hold down the

switch for 5 seconds

Green light will ﬂash quickly