User Guide

23
Use the SD card to transfer customized
settings to or from the thermostat. Insert the
SD card into the thermostat only from Home
or Default Display.
1. Insert the SD card into the slot located
on top of the thermostat where indicated.
(SD icon begins  ashing).
Note: Copy and Paste options appear.
2. Press Paste to copy the settings from
SD card to the thermostat.
3. Press Copy to transfer the settings from
the thermostat to the SD card.
4. Press Go Back to complete process.
Note: After selecting one of the above
options, the SD card display remains
active until user selects Go Back and
the SD card is removed (or menu reverts
to Default Display).
LOAD SD CARD SETTINGSLOAD SD CARD SETTINGSLOAD SD CARD SETTINGS
PRESS ANY KEY TO BEGIN
i
Note: If SD card is locked, only Paste
appears; user may only copy from SD
card to thermostat.
i
Press Paste to copy the settings from SD card to
the thermostat.
When the SD card is inserted, the SD icon begins
flashing. Icon stops flashing when processing data.