User Guide

19
Override allows application of temporary heat
or cool settings. (Example uses System Auto.)
1. Press Override, or ▲/ ▼key.
Note: Setpoint  ashes. “Hold until” time
appears and is changed to show length
of override (up to the maximum hold time
speci ed in Service Menu 395).
2. Press ▲/ ▼to select a Cool Setpoint,
then press Next.
3. Press ▲/ ▼to select a Heat Setpoint,
then press Next.
4. Press ▲/ ▼to adjust time (in 15-minute
periods) until override remains in effect.
5. Press Done to save changes and exit.
Note: Override remains ( ashing) in
effect until the time period ends.
Note: Press Cancel to exit Override.
PROGRAM OVERRIDEPROGRAM OVERRIDEPROGRAM OVERRIDE
PRESS ANY KEY TO BEGIN
Note: Setpoints available depend on the
system mode selected (see “Select System
Preferences”) . Override display options
can be defined in Service Menus .
i
Note: The installer setup can limit the
length of time for an override to 1, 2, 3, or
4 hours beyond the current time.
i
Example shows how to select a Cool Setpoint for a
temporary period in System Auto mode.