User Guide

8. Press ▲/ ▼ to select a scheduled event

(e.g,

Occupied1, etc.), then

9. Press ▲/ ▼to schedule start time for

event (in 15-minute periods), then Next.

Now select a Heat Setpoint and/ or Cool

Setpoint for the scheduled event (available

options depend upon system type selected).

10. Press ▲/ ▼to select desired Heat

Setpoint, then press Next.

11. Press ▲/ ▼to select desired Cool

Setpoint, then press Next.

Note: The

next event (e.g., Unocc1) begins  ashing

after

is selected. Complete steps

3-11 for each scheduled event.

12. Press Done to exit schedule mode.

Note: Pressing Go Back after step 11

will show Select Day on display.

PROGRAM SCHEDULED EVENTSPROGRAM SCHEDULED EVENTSPROGRAM SCHEDULED EVENTS

Note:

To return to the menu of scheduled

events and continue programming, select

Next after Step 11.

Note: To

program 5-1-1 day or 5-2 days,

see Service Menu 100 (

“Performance PRO

T8000 Series Installation Guide”). Block-

programmed days flash as a group.

PRESS ANY KEY TO BEGIN

Press ▲/ ▼to select a desired Heat Setpoint for the

currently selected scheduled event (Occupied1).