User Guide

If thermostat is model T12532-IAQ, a humidity

sensor is present, which allows user to set

dehumidify and humidify control setpoints.

1. Press lower left and lower right keypad

area to activate Service Menus.

2. Press Cool ▲/ ▼for Service Menu

490.

3. Select appropriate option to enable

Dehumidify, Humidify, or both (1, 2 ,or 3).

4. Press Done to return to Home Display.

5. Press Humidity key to set Dehumidify

Setpoint. Beside “dE” Press ▲/ ▼to

select desired Dehumidify Setpoint.

6. Press Humidity key to view Humidify

Setpoint. Next to “hu” Press ▲/ ▼to

select desired Humidify Setpoint.

7. Press Done to save and exit.

Note: Instruction assumes humidity sensor

is installed and is enabled (see Service

Menu 490). Integrated sensors (not

included) must be ordered separately.

SELECT HUMIDITY SETPOINTS SELECT HUMIDITY SETPOINTS SELECT HUMIDITY SETPOINTS

PRESS TOUCHSCREEN TO BEGIN

Adjust the Dehumidification Setpoint by pressing the

arrow keys.

Press the Humidity key to switch between

Dehumidification and Humidification Setpoint.