User Guide

19
Override allows temporary override of heat or
cool settings (example uses System Auto).
1. Press Override key.
Note: “Hold until” time appears and is
changed to show length of override (up
to the maximum hold time speci ed in
Service Menu 395).
2. Press Cool ▲/ ▼to select a Cool
Setpoint.
3. Press Heat ▲/ ▼to select a Heat
Setpoint.
4. Press ▲/ ▼to adjust time (in 15-minute
increments) override remains in effect.
5. Press Done to save changes and exit.
Note: Override remains ( ashing) in
effect until the time period ends.
Note: Press Cancel to exit Override.
PROGRAM OVERRIDEPROGRAM OVERRIDEPROGRAM OVERRIDE
PRESS TOUCHSCREEN TO BEGIN
Note: Available setpoints are determined
by the system mode selected (see “Select
system mode”) .
i
Note: The installer setup can limit override
to 1, 2, 3, or 4 hours beyond current time.
i
Example shows how to select a Cool Setpoint that
lasts until 12:30 pm in System Auto mode.