User Guide

18
Now select a Heat Setpoint and Cool Setpoint
for the scheduled event (available options
depend upon system type selected).
6. Press Cool ▲/ ▼to select Cool
Setpoint.
7. Press Heat ▲/ ▼to select Heat
Setpoint.
8. Schedule next event (e.g.,UNOCC1)
and repeat steps 2-7.
Note: Previously selected days remain
active for programming unless changed.
9. Press Done to exit Schedule mode.
PROGRAM SCHEDULED EVENTSPROGRAM SCHEDULED EVENTSPROGRAM SCHEDULED EVENTS
Note: To program 5-1-1 day or
5-2 days format, see Service Menu 100
( “Performance PRO T12000 Series
Installation Guide”).
i
PRESS TOUCHSCREEN TO BEGIN
Note: At any time, press Cancel to abort
current selection, or press Done to save
changes and return to Home Display.
i
Create another scheduled event after OCC1.
See Step 8.
Example shows UNOCC1 settings for weekdays.