User Guide

15
RESET FILTER TIMERRESET FILTER TIMERRESET FILTER TIMER
The Filter Indicator serves as a reminder to
change the furnace  lter (see note below).
When the  lter timer expires, a Filter Indicator
appears.
1. From the Default Display, press any key
to enter the Filter mode (FIL/Filter,
Cancel and Done appear).
2. Press Done to reset the  lter timer.
Note: Pressing Done restarts  lter timer
with previous time value selected.
3. Press Cancel to bypass the reminder
and return to the Home Display.
PRESS TOUCHSCREEN TO BEGIN
Note: The thermostat will return to the
Filter menu from the Default Display until
Done is selected (see Service Menu
230 in the “Performance PRO T12000
Series Installation Guide” for settings).
i
When the filter expires, the Default Display on the
thermostat will automatically show a Filter Indicator
in one of the two above locations.