Accessory List

MA-5200 Series, MA-5300 Series
76
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Two-Position Actuators
Model Chart
Specifications
These actuators are used for electric two-position
control of globe valves and dampers which require
a return to the normal position upon power
interruption.
Features:
• Two-position actuators controlled by an SPST controller.
•Spring return.
• Available 24, 120, and 240 Vac models.
• An actuator with the part number suffix "-500" has a
built-in, adjustable, SPDT auxiliary switch.
• Available damper models with linkage or base models that
require separate damper or valve linkage.
• Die cast lower housing with 1/2 in. conduit opening and
painted steel upper housing.
• Hydraulic actuator with oil-immersed motor and pump.
Damper Actuators.
Model No.
Actuator Power Input
Timing in Seconds at 72°F (22°C)
Damper
Output Torque
Rating
AC Voltage (±10%)
50/60 Hz
To Extend
(No Load Stroke)
Retract on Power
Loss
Watts VA
MA-5330 120 10 16.8
60 15 20 lb-in.
MA-5333 24 8.8 15.6
Valve Actuators. Also for Damper Actuators with Field Assembled Damper Linkages.
Model No.
Actuator Power Input
10 Amps
Aux
Switch
Timing in Seconds at 72°F
(22°C)
Required Linkage
a
a
Damper models are provided with factory-installed damper linkages. Only base models require separately-ordered linkages.
Damper
Output
Torque
Rating
AC Voltage
(+10/-15%)
50/60 Hz To Extend
(No Load
Stroke)
Retract on
Power Loss
Damper Valve
Watts VA
MA-5210
120
10
16.8
No
60 15 AM-601
AV-601 AV-
7600-1
20 lb-in.
MA-5210-500
Yes
MA-5211
240
19.2
No
MA-5211-500
Yes
MA-5213
24
15.6
No
MA-5213-500
Yes
Actuator inputs
Control circuit
Two wire, SPST.
Power input
Refer to Model Chart.
Connections
Color-coded 4 ft. (1.2 m) leads.
MA
-
5200
Series,
MA-5300
Series
MA-5200 Series
Valve Actuator
MA-5300 Series
Damper Actuator