Accessory List

CP-8301-xxx Series
54
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Figure 2 Typical CP-8301-024 on 120 or 240 Vac Actuators with Built-in Transformer.
2
1
3
4
Typical Controllers
TP-8101
CP-8102
CP-8301-024
Actuator
+20 (Red)
OP (Yellow)
COM (Blue)
Blue
Yellow
Red
Brown/Black
Brown/White
Brown 4
7
8
L1
L2
3
Red
2
X
AC Supply
Red/Black
Blue/Black
Yellow/Black
Black
Black/Blue
1 CP-8301-024 can be used with the
following electric actuators: MP-465,
475,483, 485, 486, 2150-500, and 9750.
2 Case Ground.
3 Actuator rotates clockwise on increase in
input signal. To rotate actuator
counterclockwise on an increase in input
signal, reverse blue/black and red/black
leads, and reverse brown/black and
brown/white leads.
4 Line voltage actuator must have built-in
transformer. Remove blue lead from
terminal 7 and tape off. Remove red lead
from terminal 8 and attach to black lead of
drive. Attach black/blue lead of drive to
case ground.