Accessory List

CP-8301-xxx Series
52
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
2 to 15 Vdc Input Electronic Actuator Drive
Model Chart
a CAUTION: Remove red and blue transformer wires from terminals 7 and 8 of actuator and tape.
The CP-8301-xxx Series electronic actuator drive is
designed to process a variable 2 to 15 Vdc signal
from a controller to provide proportional control of
an electric gear train actuator.
Features:
• Mounts directly onto TAC proportional, electric, gear train
actuators.
• 24, 120, and 240 Vac models available.
• Color-coded pigtail leads.
Model No.
Power Requirement
Vac, 4.8 VA 50/60 Hz
(+10/-15%)
Power Supply
a
a
The power supply must not be connected to +20 (red) of other supplies.
Start Point of Actuator Span
CP-8301-024 24
20 Vdc, 50 mA regulated
and filtered.
Adjustable from 2 to 12 Vdc input.
Factory set at 6 Vdc.
Fixed at 3 Vdc for full
actuator stroke.
CP-8301-120 120
CP-8301-240 240
Typical Actuators.
Actuator Series
Power Torque
Stroke Degrees Spring Return
Vac
60 Hz
Amp Lb-in. N-m
MP-2113-500
24
2.2
50 5.6
180
⎯
MP-361
2.5
CW
MP-371 CCW
MP-381 220 24.9 ⎯
MP-465
a
120
0.5
50 5.6
CW
MP-475
a
CCW
MP-483
a
220 24.9
90
⎯
MP-485
a
180
MP-486
a
MP-495
a
0.95 450 50.8
MP-9713 24 4.0
800 90
MP-9750
a
120 0.9
CP-8301-
xxx Serie
s