Accessory List

CP-8122
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 41
Accessories
Typical Applications
Figure 1 Input/Output Connections.
Specifications (Continued)
Typical controlled devices
CC-8100 Series Relays.
MF-63123 Floating valve actuator.
MFC-8000 Control module card for MF-62123 actuator.
MM/MMR-400 Series Modular motor with MMC-8000 control module.
MM/MMR-500 Series Modular motor with MMC-8000 control module.
MP-300-600 Series Actuators.
MP-400-600 Series Actuators.
MP-5000 Series Actuators.
MS-1233 Series Damper actuators.
MS4D-x0x3-030 Actuators.
MS40-7043-MP Actuators.
MS40-7043-MP5 Actuators.
MS51-7103-030 Actuators.
MS51-7103-040 Actuators.
SP-40000 Series Step controllers.
Environment
Ambient temperature limits
Shipping and storage: -40 to 160°F (-40 to 71°C).
Operating: 40 to 140°F (4 to 60°C).
Humidity 5 to 95% RH, non-condensing.
Locations NEMA Type 1 indoor only.
Connections Coded screw terminals.
Cover Aluminum.
Mounting
Unit provided with plastic track for panel mounting. AD-8912 enclosure can be ordered separately for
remote installations.
Dimensions 4 H x 7-1/2 W x 2-1/2 D in. (102 x 191 x 64 mm).
General Instructions Refer to F-18503.
Model No. Description
AD-8912 Enclosure, 12 in. (305 mm).
AD-8969-201 Offset resistor kit: 5, 10, 15 and 20°F (-15, -12, -9 and -7°C).
AD-8969-901 Extended throttling range jumper.
AT-8122 Remote setpoint adjuster, dual scale 20 to 120°F (-6 to 49°C).
AT-8155 Remote setpoint adjuster, dual scale 50 to 250°F (10 to 121°C).
AT-8158 Remote setpoint adjuster, dual scale 55 to 85°F (13 to 29°C).
AT-8435 Remote setpoint adjuster, dual scale 50 to 450°F (10 to 232°C) for use with TS-8204 only.
TOOL-201 Calibration kit for TAC System 8000.
Integral Action Input
Inversion Input (2 to 15 Vdc)
High Signal Select inversion Input
Auxiliary Bridge Input
Main Sensor Input
Secondary Sensor Input
System Common
IV1
IV2
IV3
AB1
ISA
+6.2
ISB
COM
Softstart / Integral Action Status Indication
Inversion Output (15 to 2 Vdc)
Integral Action (2 to 15 Vdc)
Softstart Output (2 to 15 Vdc)
Controller Output (2 to 15 Vdc)
System Common
May be used only
when input to IV2.
RST
+20
OP4
OP3
OP2
OP1
COM
COM
Momentary Contact Closure
Input to Initiate Softstart
CP-8122
+20 Vdc Input
+6.2 Vdc Output
1
1