Accessory List

ManualsBrandsPeco Controls ManualsHeating SuppliesRemote Sensor for TAC Erie Thermostat

CP-5341

Fan Speed Controller

Model Chart

Specifications

Accessories

An electronic motor speed controller for use with

shaded pole and permanent split capacitor type

motors without integral starting switches and

starting windings, up to 120 Vac with a maximum of

5 amps running current. Used in heating and/or

cooling applications.

Features:

• Adjustable minimum cutoff speed setting to match specific

motor characteristics.

• Direct and reverse action through summer/winter selection.

• Sensor supplied and designed for convenient surface

mounting on fan coil units.

• Automatic summer/winter changeover thermostat for

sensing fluid temperature available.

Model No. Description

CP-5341 Refer to Specifications.

Setpoint dial range Dial marked “Minimum-Normal-Maximum” (55 to 85°F approximately).

Sensor

Supplied with a medallion sensor (TS-5181) for unit mounting. TS-5191 adjustable wall sensor (order

separately) for applications requiring remote sensing and setpoint.

Automatic summer/winter

changeover

TC-2931-205 changeover thermostat with plug-in connector (order separately).

Throttling range Adjustable 2 to 12 F degrees (1 to 7 C degrees), factory set at 2 F degrees (1 C degrees).

Output voltage From minimum fan speed cutoff to 105 Vac.

Minimum fan speed cutoff Factory set at 65 Vac, adjustable 65 to 105 Vac.

Environment

Ambient temperature limits

Shipping and storage: -40 to 160°F (-40 to 71°C).

Operating: 35 to 135°F (2 to 57°C).

Humidity 5 to 95% RH, non-condensing.

Locations NEMA Type 1.

Connections

Sensor

3 ft. (0.9 m) of two-conductor cable with plug-in type connections.

Note: TC-2931-205 has 3 ft. (0.9 m) cable which cannot be extended.

Power Color coded 3 ft. (0.91 m) three-conductor cord.

Case Bakelite.

Mounting

Should be surface mounted in a vertical position with mounting bracket provided. Medallion sensor

supplied with controller requires 17/64 in. dia. mounting hole.

Dimensions 3 H x 4-1/16 W x 5 D in. (76 x 103 x 127 mm).

Agency Listing UL Recognized.

General Instructions Refer to F-15094.

Model No. Description

TC-2931-205 Changeover thermostat.

TS-5191 Adjustable wall sensor.

P-5341