Manualshelf

Accessory List

ManualsBrandsPeco Controls ManualsHeating SuppliesRemote Sensor for TAC Erie Thermostat
351352353354355356357358359360
Accessories and Tools
346
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Application
TAC DuraDrive
The AM-758 universal mounting bracket is designed to provide
a mounting surface for the Mx4x-707x and Mx4x-715x
actuators when the actuators cannot be mounted directly to
the damper shaft and no proper mounting surface is available.
The bracket allows both vertical and horizontal mounting. The
bracket requires the AM-690 or AM-691 crankarm kit be used.
Specifications
• Material: 12-gauge galvanized steel.
• May be installed inside or outside the duct, mounting to the
duckwork, or directly to the damper assembly.
• When used as a replacement it will place the crankarm in the
same relative position as the Honeywell™ Mod IV actuators.
• Refer to F-25096 for complete applications.
AM-758
Universal Mounting Bracket
Application
TAC DuraDrive
The AM-759 universal mounting bracket is designed to provide
a mounting surface for the Mx4x-707x and Mx4x-715x
actuators when the actuators cannot be mounted directly to
the damper shaft and no proper mounting surface is available.
The bracket allows both vertical and horizontal mounting. The
bracket requires the AM-690 or AM-691 crankarm kit be used.
Specifications
• Material: 12-gauge galvanized steel.
• May be installed inside or outside the duct, mounting to the
duckwork, or directly to the damper assembly.
• When used as a replacement it will place the crankarm in the
same relative position as the Honeywell™ Mod III actuators.
• Refer to F-25096 for complete applications.
AM-759
Universal Mounting Bracket
Application
TAC DuraDrive
The AM-760 universal mounting brackets are designed to
provide a mounting surface for the Mx4x-707x and Mx4x-715x
actuators when the actuators cannot be mounted directly to
the damper shaft and no proper mounting surface is available.
The bracket allows both vertical and horizontal mounting. The
bracket requires the AM-690 or AM-691 crankarm kit be used.
Specifications
• Material: 12-gauge galvanized steel.
• May be installed inside or outside the duct, mounting to the
duckwork, or directly to the damper assembly.
• Provided with hole patterns to mount the actuators in a
horizontal or vertical position.
• Refer to F-25096 for complete applications.
AM-760
Slotted L Mounting Bracket