Accessory List

Accessories and Tools
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 345
Application
TAC DuraDrive
The AM-753 and AM-754 shaft mounting clamps are used to
clamp the actuator to the damper shaft. The AM-753 is used for
a 5/8” (16 mm) square shaft, or 3/4” to 1” (19 mm to 25 mm)
round shaft. Two clamps are in each package. The AM-754 is
used for a 3/8” to 1/2” (10 to 13 mm) round and square shaft.
Two clamps are in each package.
Specifications
• Material: zinc dichromate plated steel.
• For use with the following actuators:
- MA40-717x.
- MF40-717x.
- MS40-717x.
- MF41-6343.
- MS41-634x.
-MS50-H2x01.
- MS50-E2x01.
• Refer to F-26898 for complete applications.
AM-753, AM-754
Universal Mounting Clamps
Application
TAC DuraDrive
The AM-755 manual override crank is used to manually
position the actuator for setup and installation.
Specifications
• For use with the following actuators:
- MF41-6343
- MS41-634x
• Refer to F-26898 for complete applications.
AM-755
Manual Override Crank
Application
TAC DuraDrive
The AM-756 metric conduit adaptor is used with the following
actuator series: Mx40-704x, Mx4x-707x, Mx41-715x,
Mx41-717x, and Mx41-634x.
Specifications
• Material: zinc plated, low carbon steel.
• Adapts 1/2” NPT threads to M20 threads to connect metric
conduit.
• Refer to F-26899 for complete applications.
AM-756
Metric Conduit Adaptor
AM-753
AM-754