Accessory List

Accessories and Tools
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 341
Application
TAC DuraDrive
The AM-710 universal clamp is used to clamp the actuator to
3/4” diameter round shafts, 3/8” to 5/8" hex shafts, or 1/2”
square shafts. The AM-710 is required whenever the AM-676
shaft extension is used.
Specifications
• Actuators: Mx40-704x.
• Shaft sizes:
- Up to 3/4" diameter round shafts.
- 3/8” to 5/8” hex shafts.
- Up to 1/2” square for square shafts.
- Secured to actuator with retaining ring.
• Refer to F-26896 for complete applications.
AM-710
Universal Clamp
Application
TAC DuraDrive
The AM-711 crankarm kit attaches to the actuator and
provides a crankarm for non-direct mounting applications.
Specifications
• Actuators: Mx40-704x.
• Refer to F-26896 for complete applications.
AM-711
Crank Arm Kit
Application
TAC DuraDrive
The AM-712 is a crankarm kit that includes the crankarm
(AM-711) plus an actuator mounting bracket, three
flatwashers, three sheet metal screws, and three self-tapping
screws. This kit provides a mechanical linkage between the
damper actuator and the damper shaft when a direct couple is
not possible.
Specifications
• Actuators: Mx40-704x.
• Refer to F-26896 for complete applications.
AM-712
Crank Arm Kit