Accessory List

Accessories and Tools
338
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Application
TAC DuraDrive
The AM-693 damper linkage kit provides a mechanical linkage
between the damper actuator and the damper shaft when a
direct coupling is not possible.
Specifications
• Actuators: Mx4x-707x and Mx4x-715x.
• Parts included in kit:
- Crank arm with wire clip.
- “C” mounting brackets (2)
- Self-tapping metal screws (4).
- Ball joints (2).
-Flat washers (4)
• Refer to F-25098 for complete applications.
AM-693
Damper Linkage Kit
Application
TAC DuraDrive
The AM-703 span adjustment module changes non-standard
current and voltage signals into a 2 to 10 Vdc output signal.
Specifications
• Actuators: MS4x-7043, 7073, 7153, 717x, 6083, 6153 and 6343.
• Any TAC actuators that are half-wave and accept a 2 to 10 Vdc
input control signal.
• Supply voltage: 24 Vac/Vdc ± 15%.
• Input:
- Zero offset of 0 to 18 Vdc.
- Span adjustment: Span range of 2.6 to 17 Vdc.
• Will accept 4 to 20 mA signal.
• Connection: Wire terminals, 14 gauge maximum.
• Ambient temperature: -20 to 150°F (-30 to 65°C).
• Humidity: 5 to 95% RH non-condensing.
• Mounting: Snap-Track (provided)
• Dimensions:
- Board: 1-3/16” x 2-3/16” x 9/16” (30 x 56 x 14 mm)
- With Snap-Track: 1-7/8” x 2-3/8” x 15/16" (48 x 60 x 24 mm)
• Half wave device.
• Refer to F-26895 for complete applications.
AM-703
Span Adjustment