Accessory List

Accessories and Tools
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 337
Application
TAC DuraDrive
The AM-689 Rotation Limiter is used to limit the angle of
rotation of a direct coupled damper actuator in applications
where the damper does not have a proper end-stop.
Specifications
• Material: Plated steel.
• Maximum angle allowed: 95
°
.
• Setting Increments: 5
°
.
• Actuators: Mx4x-707x and Mx4x-715x.
• Refer to F-25098 for complete applications.
AM-689
Rotation Limiter
Application
TAC DuraDrive
The AM-690 crank arm kit is used in non-direct mounting
applications for round shafts. May require AM-692.
Specifications
• Actuators: Mx4x-707x and Mx4x-715x.
• Maximum damper shaft size: 3/4 in. (19 mm).
• Refer to F-25098 for complete applications.
AM-690
Crank Arm Kit
Application
TAC DuraDrive
The AM-691 crank arm kit is used in non-direct mounting
applications for jack shafts. May require AM-692.
Specifications
• Actuators: Mx4x-707x and Mx4x-715x.
• Maximum damper shaft size: 1.05 in. (27 mm) jackshaft.
• Refer to F-25098 for complete applications.
AM-691
Crank Arm Kit
Application
TAC DuraDrive
The AM-692 V-bolt kit is used with the AM-690 and AM691
crank arm. The V-bolts in the kit are used for standard and
larger diameter damper shafts when crank arm assembly is
necessary.
Specifications
• Actuators: Mx4x-707x and Mx4x-715x.
• Parts included in kit:
- (2) washers.
- (2) nuts.
-(2) V-bolts.
AM-692
V-Bolt Kit