Accessory List

Accessories and Tools
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 333
Application
Required to modify Mx-5xxx and Mxx-5xxx hydraulic actuators
for damper applications with 2 in. (51 mm) stroke.
Specifications
• Device includes:
- Mounting bracket.
- Damper linkage with spring.
- AM-122 straight connector.
- Spring loader fixture.
AM-601
Damper Actuator Mounting Adaptor
Application
TAC DuraDrive
The AM-671 universal mounting bracket with side flange is
designed to provide a mounting surface for an actuator when
the actuator cannot be mounted directly to the damper shaft
and no proper mounting surface is available.
Specifications
• To be used with the following damper actuators:
- MA40-704x.
- MF40-704x.
- MS40-704x.
- MA4x-707x.
- MF4x-707x.
- MS4x-707x.
- MA4x-715x.
- MF4x-715x.
- MS4x-715x.
• Material: 12 gauge galvanized steel.
• Dimensions: 11 W x 17 H x 6-1/4 D in.
(279 x 432 x 159 mm).
• May be installed inside or outside the duct mounting, to the
ductwork, or directly to the damper assembly.
• May also be mounted to suitable surface other than the duct.
• Refer to F-25096 for complete applications.
AM-671
Universal Mounting Bracket
Acces
sories
and
Tools