Accessory List

ManualsBrandsPeco Controls ManualsHeating SuppliesRemote Sensor for TAC Erie Thermostat

ASP-8311 Series

Power Supply

Model Chart

Specifications

Typical Applications

Figure 1 Checkout of ASP-8311 Power Supply.

Provides 20 or 24 Vdc power supply for up to six

HSP-8xxx, VER-Hx, or TSP-8xxxx Transmitters.

ASP-8311 series power supplies can be used for

TAC System 8000 applications where added

capacity is required.

Features:

• UL and CSA listed units available in ASP-8311 Series.

• Capacity rating selected to prevent damage to hardware if

misapplied.

• Dual voltage capability to meet all applications.

• Isolated output.

Model No.

Input

Voltage

Enclosure Provided Output UL CSA

ASP-8311-120 120 Vac

Yes

20 or 24 Vdc

selectable

Listed Certified

ASP-8311-240 240 Vac

DC power supplies available Selectable 150 mA maximum, 20 Vdc or 24 Vdc. Full wave isolated. Output is short circuit protected.

Power requirements

120 Vac 60 Hz, 13 watts; 50 Hz, 26 watts.

240 Vac 60 Hz, 13 watts; 50 Hz, 26 watts.

Environment

Ambient temperature limits

Shipping and storage: -40 to 160°F (-40 to 71°C).

Operating: 40 to 140°F (4 to 60°C).

Humidity 5 to 95% RH, non-condensing.

Locations NEMA Type 1.

Connections Coded pigtail leads.

Dimensions 4-11/16 H x 4-11/16 W x 2-1/8 D in. (119 x 119 x 54 mm).

Agency Listing UL, CSA.

General Instructions Refer to F-24283.

ASP

8311

Series

Meter

ASP-8311

Typical 4-20 mA

Transmitter

– (Blue)

To Controller

Terminal

+ (Red)

–

R Load

–

Vac

Input

1 Voltage across load resistor.

2 R load is located at controller.

3 Transmitters are considered as two of

the six possible units being powered.

Typical transmitters include:

VER-HDxx, VER-HOxx, VER-HW,

TSP-8xxx.