Accessory List

TP-8232, TP-8232-xxx Series
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 275
Accessories
Typical Applications
Figure 7 Typical Wiring Diagram ⎯ Direct Acting Output Only.
Model No. Description
AD-8969-201 Offset resistor.
AT-101 Lock cover kit.
AT-104 Dial stop pins.
AT-504 Plaster hole cover kit (small).
AT-505 Surface mounting base.
AT-546 Auxiliary mounting plate.
AT-1103 Wire guard.
AT-1104 Cast aluminum guard.
AT-1155 Plastic guard, 6-1/4 H x 5-1/2 W x 3-1/4 D in.
AT-1165 Plastic guard, 8 H x 5-1/2 W x 3-1/2 D in.
AT-8122 Remote setpoint adjuster, dual scale 20 to 120°F (-6 to 49°C).
AT-8155 Remote setpoint adjuster, dual scale 50 to 250°F (10 to 121°C).
AT-8158 Remote setpoint adjuster, dual scale 55 to 85°F (13 to 29°C).
TS-8131 Room button type sensor.
TS-8201 Duct/immersion sensor.
TS-8261 Light fixture sensor.
TS-8405 Averaging sensor, 5 ft. (1.5 m).
TS-8422 Averaging sensor, 22 ft. (6.7 m).
TOOL-82 Allen wrench for room setpoint calibration, 5/64 in.
TOOL-201 Calibration kit for TAC System 8000.
TP-8232
Blue
Blue
Yellow
Yellow
Red
Red
Blue
Red
7
6
8
TS-8201
TS-8405
TS-8261
Supply
Sensor
TS-8131
TS-8201
Remote
Sensor
AT-8100
Series
Remote
Setpoint
2
4
5
CP-8301
MP-5xxx
CC-810x
Typical
Controlled
Device
Max. of
5 Additonal
Controlled
Devices
1 Clip out internal sensor of
TP-8232 if used.
Alternative controlled device: MS51-7103-x40.
See F-27169 for wiring information.
1
2
2