Accessory List

TC-1151 Series, TC-1161 Series
256
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Figure 2 Options for Quantities of 24 or more of each part number.
Add dash number to base part number for desired option.
Specifications
Accessories
Setpoint dial range See Description Model Chart.
Sensing element Bimetal.
Differential
Switching: 2 F degrees (1.1 C degrees).
Staging: Adjustable 2 to 10 F degrees (1.1 to 5.6 C degrees), factory adjusted between 2 and 4 F
degrees.
Environment
Ambient temperature limits
Shipping: -40 to 160°F (-40 to 71°C).
Operating: 40 to 140°F (4 to 60°C).
Humidity 5 to 95% RH, non-condensing.
Locations NEMA Type 1.
Electrical ratings See Model Chart.
Connections Coded screw terminals.
Cover Plastic.
Mounting
Flush on single or 2-gang switch box or 4 x 4 in. (102 x 102 mm) surface box or directly to wall
(24 Vac only).
Dimensions 4-3/8 H x 4-3/4 W x 1-5/8 D in. (111 x 121 x 41 mm).
Agency Listing UL.
General Instructions
TC-115: Refer to F-18782.
TC-1161: Refer to F-16290.
Model No. Description
AT-101 Lock cover kit (2 required per thermostat).
AT-104 Dial stop pins (note: pins included with each unit).
AT-546 Auxiliary mounting plate
AT-607 Selector switch sub-base DP4T.
AT-608 Selector switch sub-base one DP4T, one DPDT.
AT-1155 Plastic guard for TC-1161 series.
AT-1163 Plastic guard for TC-1151 series.
AT-1165 Plastic guard.
TOOL-11 Calibration wrench.
TOOL-13 Contact burnishing tool.
-400 -401 -402 -403 -404