Accessory List

TA-167 Series, TB-167 Series
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 233
TAC Erie™ Non-Digital, Proportional Thermostat/Controller
Model Chart
Specifications
The T167 series microprocessor based
thermostat/controller provides 0-10 Vdc control.
This series controls a variety of two-pipe and four-
pipe fan coil units, air handling units, unitary
equipment, and various heating and cooling
applications.
Features:
• 0-10 Vdc heat and/or cool outputs.
• Fahrenheit standard. Optional Celsius setpoint dial.
Model Heat/Cool Outputs Fan Control System Switches
TA-167-1
a
a
Model has no deadband between heating and cooling. If using as a heat/cool control an optional changeover thermostat (680-243-x) is required.
Dual None
None
TA-167-3 Heat, Off, Cool
TB-167-1 None
Inputs
Power input 20 to 28 Vac, nominal 24 Vac, full wave device.
Power consumption 25 mA maximum at 24 Vac.
Connections
Power: Up to 14 AWG wire.
Control: Up to 14 AWG wire.
Outputs
Electrical Heat and cool output rating: 0-10 Vdc 1000 Ω minimum. Full wave device.
Control ranges
Proportional band: 2 F degrees (1.1 C degrees).
Setpoint adjustment range: 50 to 90°F (10 to 32°C).
Mechanical
Material: Rigid vinyl.
Finish: Cool gray.
Environment
Ambient temperature limits
Shipping and storage:-20 to 120°F (-29 to 49°C).
Operating: 0 to 120°F (-18 to 49°C).
Humidity Maximum 95% non-condensing.
Locations NEMA Type 1.
Dimensions 4-1/2 H x 2-3/4 W x1 D inches (114 x 79 x 25 mm).
Agency Listings UL/CUL Listed File #E50023, CE compliant. Except TA167-001, TB167-001.
General Instructions Refer to F-27024.
A
-
167
r
ies, TB-
7
Series
US
O
f
f
M
e
d
C
o
o
l
H
i
H
e
a
t
L
o
w