Accessory List

T200 Series
220
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
TAC Erie™ Digital, On/Off Thermostat
Model Chart
T200 series thermostats provide temperature
control on a variety of heating, cooling and single
stage heat pump applications.
The large LCD window displays room temperature
including 1/5
th
of a degree increments indicated by
a series of up to 5 dashes. The system heat output
cycles on a 1 or 2F degree field selectable
differential. The cool output differential is fixed at
2F degrees. The setpoint is displayed and changed
by pressing one of the setpoint buttons up or
down. Installation is simplified by having all of the
field wires mounted to the separate wall plate.
Features:
• LCD window display, °F standard, °C configurable.
• Jumper selectable 5 minute time delay for heating and
cooling application.
• Mechanical contact for low limit protection (optional).
• Base adaptor plate standard.
Model No. Control Outputs
Fan Control
a
a
Fan switch operates independent of system switch unless relays are added.
System Switch
a
Changeover Mechanical Contact B & O Terminals
T201 Heating Only None Heat/Off None No No
T201-FP
b
b
Low limit protection, at 40°F the thermostat mechanically latches heat with output.
Heating Only None Heat/Off None Yes No
T204 Cooling Only On/Auto Cool/Off None No
No
T205 Cooling & Heating On/Auto Cool/Off/Heat Manual No
No
T205-FP
b
Cooling & Heating On/Auto Cool/Off/Heat Manual Yes
No
T207 Cooling & Heating On/Auto Cool/Off/Heat Manual No
Yes
T207-FP
b
Cooling & Heating On/Auto Cool/Off/Heat Manual Yes
Yes
T200
S
er
ie