Accessory List

AE-504
8
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Paralleling Relay
Model Chart
Specifications
Paralleling relay for controlling or manually
positioning MP type proportional gear train
actuators from a potentiometer (slidewire).
Features:
• Provides interface between a 100 to 1000 Ω potentiometer
and a gear train actuator.
• Mounts directly to the gear train actuator.
Model No.
Transmitting Potentiometer Requirements
Actuators Controlled by AE-504
Max. Ω
Watts per
AE-504
Max. No. of AE-504s
per Potentiometer
AE-504
100
a
to 135
a
Actuator equipped with AM-332 potentiometer kit.
1.5 3
MP-300, 400, 2000, 4000, 9700 Series,
MP-9810
b
, 9830
b
, 9910
b
b
Requires AM-345.
136 to 1000 3 1
Inputs
Signal
100 to 1000 Ω potentiometer. Up to 3 actuators, each equipped with an AE-504, can be operated
from an AM-332 or a 135 Ω slidewire.
Power
24 Vac, 50/60 Hz, 5 VA, normally supplied from an actuator. Line voltage actuator must have built-in
transformer.
Impedance 50 Ω at 0 Vac, 350 Ω at 12 Vac.
Environment
Ambient temperature limits
Shipping and storage: -40 to 140°F (-40 to 60°C).
Operating: 30 to 135°F (-1 to 57°C).
Humidity 5 to 95% RH, non-condensing.
Locations NEMA Type 1.
Case Epoxy.
Connections Six 8 in. (203 mm) color coded leads.
Mounting
Panel mounted with adhesive pads provided. Unit is supplied with 1/2 in. threaded connector and
mounting nut for direct mounting to actuator.
Dimensions 3-1/2 H x 2 W x 2 D in. (89 x 51 x 51 mm).
General Instructions Refer to F-16524.
AE
-
504