Accessory List

MS4D-7033 Series, MS4D-8033
184
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Spring Return TAC DuraDrive™ Proportional Actuator
Model Chart
TAC DuraDrive overshaft actuators are designed to
provide an economical and reliable solution for many
overshaft damper and ball valve requirements. All
products accommodate shaft sizes up to 1/2 in. (13
mm) in diameter.
Spring return models provide 30 in-lb (3.4 N-m) of
torque.
Features:
• Controlled by 0 to 3 Vdc, 6 to 9 Vdc, 0 to 10 Vdc, 2 to 10 Vdc
or 4 to 20 mAdc. Control function direct/reverse action is
jumper selectable.
• 30 in-lb (3.4 N-m) of torque.
• Polymer housing rated for NEMA 2/IP54.
• Overload protection throughout stroke.
• Proportional models automatically adjust the input span to
match the damper/valve travel.
• Compact size to allow installation in limited space.
• Manual override to allow positioning of dampers and valves.
• Directly mounts to 1/2 to 3 in. ball valves.
• Polymer housing rated for plenum use.
Part No. Rotation Control Signal Voltage
Wiring
System
Actuator Power Input Approximate
Timing
a
in Sec. @
70
o
F (21
o
C)
a
Timing was measured with no load applied to actuator.
Running Holding
50/60 Hz DC Amps 50/60 Hz
Powered
Spring
Return
(CCW)
VA W W
MS4D-7033-100
CCW
2 to 10 Vdc
Proportional
24 VAC ± 20% or
20-30 Vdc
Plenum Cable 6.1 3.4 0.12 1.4 85 21
MS4D-7033-120
0 to 3 Vdc
Proportional
MS4D-7033-130
6 to 9 Vdc
Proportional
MS4D-7033-150
0 to 10 Vdc
Proportional
MS4D-7033-160
4 to 20 mAdc
Proportional
MS4D-8033-100
CW
2 to 10 Vdc
Proportional
MS4D-8033-120
0 to 3 Vdc
Proportional
MS4D-8033-130
6 to 9 Vdc
Proportional
MS4D-8033-150
0 to 10 Vdc
Proportional
MS4D-8033-160
4 to 20 mAdc
Proportional
MS4D
-
703
Series,
MS4D-80
3
US
LISTED