Accessory List

MS4D-60x3 Series
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 181
Non-Spring Return TAC DuraDrive™ Proportional Actuator
Model Chart
TAC DuraDrive overshaft actuators are designed to
provide an economical and reliable solution for
many overshaft damper and ball valve
requirements. All products accommodate shaft
sizes up to 1/2 in. (13 mm) in diameter.
Non-spring return models provide either 35 in-lb
(4 N-m) or 70 in-lb (8 N-m) in proportional control.
Features:
• Proportional models controlled by 0 to 3 Vdc, 6 to 9 Vdc, 0
to 10 Vdc, 2 to 10 Vdc or 4 to 20 mAdc. Control function
direct/reverse action is jumper selectable.
• Non-spring return models supply 35 in-lb (4 N-m) or 70 in-
lb (8 N-m) of torque.
• Polymer housing rated for NEMA 2/IP54.
• Overload protection throughout stroke.
• Automatically adjust the input span to match the
damper/valve travel.
• Compact size to allow installation in limited space.
• Manual override to allow positioning of dampers and
valves.
• Directly mounts to 1/2 to 3 in. ball valves.
• Polymer housing rated for plenum use.
Model No.
Torque
in-lb
(N-m)
Control Signal Voltage Wiring System
Actuator Power Input
Approximate
Timing
a
in
Seconds @ 70°F
(21°C)
a
Timing was measured with no load applied to actuator.
Running Holding
50/60 Hz
DC Amps
50/60 Hz
VA W W
MS4D-6043-100
35 (4)
2 to 10 Vdc
Proportional
24 VAC +/-20% or
20-30 Vdc
Plenum Cable
4.2 2.2 0.08 1.2 85
MS4D-6043-120
0 to 3 Vdc
Proportional
Plenum Cable
MS4D-6043-130
6 to 9 Vdc
Proportional
Plenum Cable
MS4D-6043-150
0 to 10 Vdc
Proportional
Plenum Cable
MS4D-6043-160
4 to 20 mAdc
Proportional
Plenum Cable
MS4D-6083-100
70 (8)
2 to 10 Vdc
Proportional
Plenum Cable
5.2 2.7 0.10 1.4 85
MS4D-6083-120
0 to 3 Vdc
Proportional
Plenum Cable
MS4D-6083-130
6 to 9 Vdc
Proportional
Plenum Cable
MS4D-6083-150
0 to 10 Vdc
Proportional
Plenum Cable
MS4D-6083-160
4 to 20 mAdc
Proportional
Plenum Cable
S4D
-
60
x
3
r
ies
US
LISTED