Accessory List

MS41-6153 Series
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 179
Accessories
Specifications (Continued)
Outputs
Position output signal wires 9 and 2.
Output voltage: 0 to 10 Vdc.
Maximum output current: ± 1 mA
Electrical
Dual auxiliary switches available on MS41-6153-502.
Switch contact rating: 6A resistive, 2A inductive.
Switch voltage: 24 Vac.
Switching hysteresis: 2.
Switch range: Switch A: 0 to 90° range in 5° intervals; Recommended range usage: 0 to 45°; Factory
setting: 5°. Switch B: 0 to 90° range in 5° intervals; Recommended range usage: 45 to 90°; Factory
setting: 85°.
Timing: 150 seconds @ 50 Hz. 125 seconds @ 60 Hz.
Mechanical
Output torque rating: 133 lb-in. (15 N-m).
Stroke: Normal angle of rotation is 90°, limited to a maximum of 95°. Field adjustable to limit travel on
either end of stroke.
Position indicator: Adjustable pointer is provided for position indication.
Environment
Ambient temperature limits
Operation: -25 to 130°F (-32 to 55°C).
Storage and transport: -40 to 158°F (-40 to 70°C).
Humidity 5 to 95% RH, non-condensing.
Locations NEMA Type 1, IP54 according to EN 60 529.
Dimensions 8-3/8 H x 3-1/4 W x 2-2/3 D in. (213 x 83 x 68 mm).
Agency Listings
UL UL-873, Underwriters Laboratories. UL Listed to UL 60730.
European Community EMC Directive (89/336/EEC). Emissions (EN50081-1). Immunity (EN61000-6-2).
CUL Canadian Standards C22.2 No. 24-93.
General Instructions Refer to F-27215.
Model No. Description
AM-674 Weather shield.
AM-675 Mounting base for weather shield.
AM-703 Span adjustment module.
AM-704 Pulse to 2 to 10 Vdc converter.
AM-705 Remote positioner surface mount for 0 to 10 Vdc control.
AM-706 Remote positioner flush mount for 0 to 10 Vdc control.
AM-726 Linear conversion kit with mounting bracket.
AM-727 Linear conversion kit.